![]() ![]() To copy the firmware to the memory card, a computer is used.Ĭonnect the card reader to the computer and insert a formatted memory card. ![]() If the firmware update is not automatically extracted, install StuffIt Expander or other compatible archive expansion software and extract the update. If extraction is successful, the folder “SB900Update” will contain the following files:Īutomatic extraction requires archive expansion software compatible with StuffIt Expander, available from Allume Systems, Inc. This upgrade can be used with firmware version 5.01.Ĭlick the I agree - Begin download link on the download site to download the file “”. This file will then be automatically extracted to create the folder “SB900Update”. The current firmware version will be displayed. Rotate the selector dial to choose Version of firmware, and press the button. one second to display the custom setting. Do not use Microdrive cards.Ĭheck the current SB-900 firmware version in the computer) before initializing the memory card. Please copy all necessary data in the card (e.g. To upgrade the SB-900 firmware, you will need:Ī camera that supports the SB-900 (the D3 is used as an example in this guide)įor the camera equipped with Mass Storage, choosing Mass Storage from USB option allows you to connect the camera to the computer by using the USB cable.Įither of the following power sources for the camera and SB-900:Ī Nikon-approved memory card that has been formatted in the camera.Īll data in memory card get erased when it is initialized. If the update is not completed successfully and the camera or SB-900 becomes inoperable, take the device to a Nikon-authorized service representative for inspection. Do not turn the camera or SB-900 off, remove or disconnect the power source, or operate the camera or SB-900 during the update. The camera or SB-900 may be damaged if power is interrupted any operations are performed during the update. If you are not confident that you can perform the update successfully, the update can be performed by a Nikon service representative. This guide describes how to upgrade the camera firmware for the SB-900 Speedlight.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |